Specifications

Application Note
Using Verizon IP Trunk Services with the HiPath 3000 V9 system
Page 45 of 55
11.1.9 Create LCR Dial plan and LCR Route Group
Under the Least Cost Routing > Dialplan confirm the default number plan entries are present. If the
default entries are not present then they would need to be added to the LCR Dial plan table.
The information in the name column should be entered by the system administrator for identification
purposes.
Please note that if the system is to be connected to an OpenScape Office HX server and the customer
will be using the Fax application supported by the UC solution, the Minimum LCR COS level must be set
to 1.
Default LCR number plans for Local,
+1 dialing and International dialing.