Specifications

Application Note
Using Verizon IP Trunk Services with the HiPath 3000 V9 system
Page 41 of 55
11.1.4 Configure the Trunk Route Parameters
Under the Lines and Networking > Routing Parameters menu insure that the displayed settings are in
place
Press the Apply button after making the changes
11.1.5 Configure the IP Trunk Channel Settings
Under the Lines and networking > IP Trunks confirm the quantity of ITSP/SIP Trunks for the Verizon IP
trunk group is correct or needs to be modified. An ITSP trunk is required for every ITSP call.
If you need to add to the displayed qty for SIP provider 1, enter the additional number of channels in the
Number entry field and press the Add button.
If you need to delete channels, highlight the channels in the table and press the Delete button.
After making any changes to the configuration press the Apply button to save your changes.
Additional Notes