User's Manual

DFZM-TS2xx
Data Sheet Sheet 20 of 37 AUG 22, 2013
Proprietary Information and Specifications are Subject to Change
Burst write peak current 6 mA
Table 5-3: Poewr Consumption
(1) Normal flash access means that the code used exceeds the cache storage, so cache misses happen frequently.
5-4.DC Characteristics
Test Conditions: T
A
=25 ºC, VCC=3.0V
Parameter Test conditions Min Typ Max Unit
Logic-0 input voltage 0.5 V
Logic-1 input voltage 2.5 V
Logic-0 input current Input equals 0 V -50 50 nA
Logic-1 input current Input equals VDD -50 50 nA
I/O-pin pullup and pulldown resistors 20 kΩ
Logic-0 output voltage, 4-mA pins Output load 4 mA 0.5 V
Logic-1 output voltage, 4-mA pins Output load 4 mA 2.4 V
Logic-0 output voltage, 20-mA pins Output load 20 mA 0.5 V
Logic-1 output voltage, 20-mA pins Output load 20 mA 2.4 V
Table 5-4: DC Characteristics
5-5.Wake-up and Timing
Test Conditions: T
A
=25 ºC, VCC=3.0V
Parameter Test conditions Min Typ Max Unit
Power mode 1  active
Digital regulator on, 16-MHz RCOSC and 32-MHz crystal
oscillator off. Start-up of 16-MHz RCOSC
4 us
Power mode 2 or 3  active
Digital regulator off, 16-MHz RCOSC and 32-MHz crystal
oscillator off. Start-up of regulator and 16-MHz RCOSC
0.1 ms
Active  TX or RX Initially running on 16-MHz RCOSC, with 32-MHz XOSC OFF 0.5 ms