User's Manual

Step 2:
Setup via Ethernet Cable
System configuration shown as below
On Data Collector OLED Display
Choose ETHERNET DEVICE ( DOWN -> SELECT)
Please connect Data Collector and your computer via an Ethernet Cable.
Please skip to the Web Registration Procedure.
You can press the RESET button if you want to redo the setup.
Step 2:
Setup via Wireless (Using Wi-Fi Signal)
System configuration shown as below
On Data Collector OLED Display
Choose Wi-Fi DEVICE ( SELECT)
> Wi-Fi DEVICE
> ETHERNET DEVICE
> Wi-Fi DEVICE
> ETHERNET DEVICE