User's Manual

Step 2:
Setup via Wireless (Using Wi-Fi Signal)
System configuration shown as below
Please make sure your PC has access to internet.
Please make sure AP/Router has enable the DHCP enabled.
On Data Collector OLED Display
Choose Wi-Fi DEVICE ( SELECT)
The OLED Display will alternatively show the IP address, date and time.
Once you finished the setup, the Time and Date will be updated automatically via the internet.
> Wi-Fi DEVICE
> ETHERNET DEVICE
169.254.0.1
TTL ENERGY: XX.XkWh
00/00/0000 00:00:00
TTL POWER: X.XW