User's Manual

9
Refer to the following pictures and steps for wall-mounting.
1) To drill two holes at the distance of 83mm on the wall.
Recommended drill size:3/16(ψ4.7)
2) To insert two conical anchors in the drilled holes.
3) To use two screws to mount the wall-bracket on the conical anchors.
Looking at the picture shown below, the function of three marks is “MENU”,
“DOWN” and “SELECT”. To press down lightly on these marks to operate the DDP
menu functions (Refer to page 12).
The “MENU” mark also serves as the “RETURN” key for certain features within
the menu functions
MENU DOWN SELECT