User's Manual

31
Status 2： It connects fail if LCD doesn’t display power information. For this status,
it needs to spend some time to connect again until it connects
successful. Please kindly inform our service if it always can’t display
after half hour or above.
User Host with Connect to Internet
Step 1. Please refer the “Login and Register Screen with Connect to
Internet” session to follow from step 1 to step 4 if user select the WiFi
transmitter or reference
Step 2. It can modify the IP address or domain name by user if you follow the
step1. Otherwise, it will block if you don’t connect to internet.
Press the “Setting” if you key in finish. The default is our host.
169.254.0.1
ID: 1 POWER: W