User's Manual

Step 4. After pressing the “SETTING”, you can see the message “PLEASE AWAIT

CONFIG” display on LCD. The time count is depending on your PV micro

inverter numbers to connect with DDP. The power information displays

after time counting finishes.

Attention

The DDP connects with PV micro inverters by using the power line

communication (PLC) method. It takes some times to connect, but it doesn’t

connect successful because the PLC can’t verify success. So, it will display two

statuses as bellow if time count has finished.

Status 1： It connects successful if LCD displays the power information after few

minutes.

PLEASE AWAIT CONFIG

XX:XX

169.254.0.1

ID: 1 POWER:123.4W