User's Manual

5. DDP Internet Interface

You need the Internet to connect with our Delta Solar EMS webpage to monitor

and analyze the information recorded.

If you use Wi-Fi to be your transmitter type, please follow the method below to

connect to our Delta Solar EMS webpage step by step. If you press the “WPS

START” to get the new IP address successful, you can skip to step 4 operate.

Skip to step 5 and press the I Accept button if you use the ETHERNET.

Step 1. Please select the DELTA_XXXXXXXXXXXX and connect to it after the

system startup. X is Wi-Fi MAC address.

Step 2. Press 169.254.0.1 on your notebook (or computer) with Wi-Fi function to

connect device. Then press Scan Wireless Networks button. You should

see all AP router lists after device detecting has finished.