User's Manual

NOTE:

We suggestion you don’t use WPS function if your AP router doesn’t have

logo.

If you want to do it when you have already connected, you must press “SYSTE

RESET” to do again.

Finally, it will return to power information when you press the “EXIT MENU”.

Restart the DDP

If the utility power fails, or you need to restart the DDP equipment, just press the

Reset button to start up again. It will resume operation when power and internet

connection are restored. If you use the Wi-Fi transmittal method, you need to

reset again to connect the internet. When it resumes operation, the LCD window

displays the “Wi-Fi DEVICE” and “ETHERNET DEVICE” message. The LCD window

will display the following:

After the restart step, normal operation resumes.

Normal Operation

Begins or resumes normal operation when the DDP system initialization is

complete. At this point, the LCD will display as below:

On screen display values are indicated as bellow:

z The IP address, such as: 192.168.x.x (your actual local IP will be

different from your AP configuration)

> Wi-Fi DEVICE

ETHERNET DEVICE

192.168.xxx.xxx Web

ID: 1 POWER:123.4W

IT HAS CONNECTED

WPS CAN NOT WOR