Datasheet

DS_DD03S/D_03152012 E-mail: [e-mail]
http://www.delta.com.tw/dcdc
Power Derating Curve
Output Power (%)
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
3 Ripple & Noise measurement bandwidth is 0-20MHz.
4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not
damage these modules; however they may not meet all specifications listed.
5 All DC/DC converters should be externally fused at the front end for protection.
6 Specifications subject to change without notice.
Mechancial Drawing
Mechanical Dimensions Pin Connections
Pin Single Output Dual Output
1 +Vin +Vin
2 NC -Vout
3 NC Common
10 -Vout Common
11 +Vout +Vout
12 -Vin -Vin
13 -Vin -Vin
14 +Vout +Vout
15 -Vout Common
22 NC Common
23 NC -Vout
24 +Vin +Vin
NC: No Connection
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin diameter ⇔ 0.5 ±0.05 (0.02±0.002)
Physical Outline
Case Size : 31.8x20.3x10.2mm (1.25x0.80x0.40 Inches)
Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Weight : 12.4g
P3
Bottom View
12 1112
13152324
17.78 [0.70]
31.8 [1.25]
2x2.54
[2x0.10]
2.0
[0.08]
14
3 10
22
2x2.54
[2x0.10]
10.2
[0.40]
4.5
[0.18]
15.22 [0.60]
20.3 [0.80]
2.54
[0.10]
0.50 [0.02]