Datasheet

DS_DB02S/D_03152012 E-mail: [e-mail]
http://www.delta.com.tw/dcdc
Power Derating Curve
~
]Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100 110
8040
Natural
convection
100LFM
200LFM
400LFM
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
3 Ripple & Noise measurement bandwidth is 0-20 MHz.
4
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will
not damage these modules; however, they may not meet all specifications listed.
5 All DC/DC converters should be externally fused at the front end for protection.
6 Specifications subject to change without notice.
Mechancial Drawing
Mechanical Dimensions Pin Connections
Pin Single Output Dual Output
1 -Vin -Vin
7 NC NC
8 NC Common
9 +Vout +Vout
10 -Vout -Vout
16 +Vin +Vin
NC: No Connection
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin diameter ⇔ 0.5 ±0.05 (0.02±0.002)
Physical Outline
Case Size : 23.8x13.7x8.0mm(0.94x0.54x0.31 )inches)
Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Weight : 5.1g
P3
8.0 [0.31]
0.5 [0.02]
15.24 [0.60]
10.16 [0.40]
13.7 [0.54]
178
16 10 9
0.50 [0.02]
1.77
[0.07]
2.54
[0.10]
3.0
[0.12]
3.8
[0.15]
23.8 [0.94]
Bottom View