Fea Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Introduction DB-456 AA is a high performance digital color monitor for use with IBM PC/XT/AT and PS/2 computers or compatibles with analog RGB output. Contents of purchase Your DB-456 AA package + DB-456 AA high performance color monitor. * Power cord. o User's guide clues the following Features + True multi scanning ability allows automatic tracking of horizontal frequencies from 30 to 57 KHz and vertical frequencies from 50 10 120 Hz.
¥ Dimensions 90° Front View Width: 350 mm Height: 360 mm Side View Base: 240 mm Tilt up: 12° DOWN: 5° roP FRONT B 369 nm 2 i Top View Depth: 380 mm Depth: 380 mm Swivel Angle .
Installation Caution: Be sure to turn off the AC power to the monitor before making connections. 1. Assemble the tilt swivel base as show below 2. Connect the power cord as show below. 3. Connect the end of the signal cable to the display connector of computer and tighten the screws as show below. 4. Tum monitor on and then tum computer on.
¥ Using the right power cord for 230VA For units used at 120V : Use a UL list cord set consisting of a minimum No.18 AWG, Type SVT or SIT. rated 6A minimum 125V, three conductor cord a maximum length and a parallel blade. grounding type attachment plug. For units used at domestication use) © Use a UL list cord set consisting of a minimum No.18 AWG. Type SVT or SIT. rated 3A minimum 250V. three conductor cord a maximum length and tandem blade, grounding type attachment plug : For units used at Outsider U.S.
POWER SWITCH { MODE) : rl il LED MODE Functions Brightness ~ |Brightness + [Contrast ~ Contrast + @® (| Function size — |V-Size + [H-Size Haze Function |V-Position — AV-Fosition + H-Position H-Position truncation Trapezoid Trapezoid + | Pincushion — | Pincushion LED Blink : Adjust limit (HOED) / => Recall all factory preset data ind Recall Contrast / Brightness factory preset data only.
¥ Description Brightness 3} The Brightness option adjusts the image brightness, the black Revel of the background LED LED 3 Increases the brightness of the image oO {_W ) Decreases the brightness of the image. Contrast ¥ The Contrast option adjusts the contrast between the background and the foreground of the image. LED LED {_P J Increases the contrast of the image. (OO (OA) Decreases the contrast of the image. Horizontal Size Control | The Horizontal Size caption adjusts the width of the screen.
Vertical Center Control The Vertical Center moves the screen downpour, LED LED J Moves touchscreen, © @ (7) Moves touchscreen Pincushion Control ‘The Pincushion option straightens the vertical side of the screen. LED? LED (1) Curves the screen's vertical edges outward. ® @ (I) Curvaceousness's vertical edges inward. Trapezoid Control The Trapezoid option adjusts the vertical sides of the screen's parallel Widens the screen at the top and narrows at LED LED the bottom.
¥ Factory Preset Timings Timing Chart The DB-456 AA digital monitor can run at extensive range of resolutions and refresh rates. Certain standard resolutions are factory preset. There are also fourteen timings which are user definable. For example, if your video card is setup to run 1024 pixels x 768 lines refresh rate, once you have adjusted the screen size and position to your preferences, the monitor will save this information to memory.
¥ Plug and Play The DB-456 AA digital monitor supports DDC (Display Data Channel) 1/2B standard, and the monitor is self-installing when used with DDC compatible video card. DDC isa protocol which allows the monitor to communicate with the video card. The monitor sends the factory preset modes fo the video card. Then, a table is created which matches the maximum refresh rates of the monitor with those of the video card.
7 Input Pin Assignment N10 000 COO Oe WO 000 Oe J Pin No Signal 1 RED VIDEO 2 GREEN VIDEO 3 BLUE VIDEO 4 NC 5 GROUND 6 RED VIDEO RETURN 7 GREEN VIDEO RETURN 8 BLUE VIDEO RETURN 9 NC 10 GROUND 11 NC 12 SDA 13 HORIZONTAL SYNC 14 VERTICAL SYNC (CALK) 15 SCL 1]
Additional Information Helpful Hints -Avoid exposing the monitor to direct sunlight or other heat source. eep the monitor away from magnets, motors, transformers, speakers, and televisions. “Do not place heavy objects on the cable or power cord. Safety Tips -If smoke. abnormal noise. or foul odor is present, immediately switch the monitor off and call your dealer. It is dangerous to continue using the monitor. Never remove the rear cover. The display unit contains high voltage parts.
