Manualshelf

User manual

ManualsBrandsDelta Electronics ManualsNetwork CardAC Servo Drive ASDA-AB
919293949596979899100
Chapter 6 Control Modes of Operation ASDA-A User Manual
4th Edition 2005/11/30, HE03 © DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
6-2
The steps of changing mode:
(1) Turn off the servo drive (the status of Servo Off) and turning SON signal of Digit input to be off can
complete this action.
(2) Using parameter P1-01. (Refer to chapter 7).
(3) After the setting is completed, cut the power off and restart the drive again.
The following sections describe the operation of each control mode, including control structure, command
source and loop gain adjustment, etc.