User manual

Chapter 4 Display and Operation ASDA-A User Manual
4th Edition 2005/11/30, HE03 © DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
4-8
Figure 4.5
SET
or
SET
or
SET
SHIFT
The learning position and Internal memorized position are listed as below:
Learning Position Internal Memorized Position
JOGo1 P1-15(Position rotation number), P1-16(Position pulse number)
JOGo2 P1-17(Position rotation number), P1-18(Position pulse number)
JOGo3 P1-19(Position rotation number), P1-20(Position pulse number)
JOGo4 P1-21(Position rotation number), P1-22(Position pulse number)
JOGo5 P1-23(Position rotation number), P1-24(Position pulse number)
JOGo6 P1-25(Position rotation number), P1-26(Position pulse number)
JOGo7 P1-27(Position rotation number), P1-28(Position pulse number)
JOGo8 P1-29(Position rotation number), P1-30(Position pulse number)
4-4-4 DO signal Force Output Diagnosis Operation
The digital output signal can be forced to be ON or OFF. Follow the setting method in Figure 4.6 to enter
into DO signal force output diagnosis operation (OP x) mode. Pressing UP or DOWN arrow key can
change “x” value from 1 to 5 and force digital output signals DO1 to DO5 to be ON or OFF. (Please also
refer to Figure 4.6).