User manual

ASDA-A User Manual Chapter 3 Configuration and Wiring

3-1

Chapter 3 Configuration and Wiring

This chapter provides information on wiring ASDA-A series products, the descriptions of I/O signals and

gives typical examples of wiring diagrams.

3-1 Configuration

3-1-1 Connecting to Peripheral Devices

In Figure 3.1, it briefly explains how to connect each peripheral device.

Figure 3.1

"When using an external regenerative resistor, ensure P and D is closed, and P and

C is open. When using an internal regenerative resistor, connect regenerative

resistor to P and C, and ensure an open circuit between P and D."