User manual

ASDA-A User Manual Chapter 7 Parameters
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 4th Edition 2005/11/30, HE03
7-61
P4 - 15 COF1
Current Detector Offset (V1 phase) Communication Addr.: 040FH
Default: Factory setting Applicable Control Mode: P/S/T
Range: 0~32767
See P4-11 for explanation.
P4 - 16 COF2
Current Detector Offset (V2 phase) Communication Addr.: 0410H
Default: Factory setting Applicable Control Mode: P/S/T
Range: 0~32767
See P4-11 for explanation.
P4 - 17 COF3
Current Detector Offset (W1 phase) Communication Addr.: 0411H
Default: Factory setting Applicable Control Mode: P/S/T
Range: 0~32767
See P4-11 for explanation.
P4 - 18 COF4
Current Detector Offset (V2 phase) Communication Addr.: 0412H
Default: Factory setting Applicable Control Mode: P/S/T
Range: 0~32767
See P4-11 for explanation.
P4 - 19 TIGB
Adjustment Level of IGBT NTC Communication Addr.: 0413H
Default: Factory setting Applicable Control Mode: P/S/T
Range: 1~7
This parameter cannot be reset.
Please cool the servo drive to 25
o
C when performing this function..
P4 - 20 DOF1
Offset Adjustment Value of Analog Monitor Output
(CH1)
Communication Addr.: 0414H
Default: 0 Applicable Control Mode: P/S/T
Range: -800~800
Unit: mV
This parameter cannot be reset.
P4 - 21 DOF2
Offset Adjustment Value of Analog Monitor Output
(CH2)
Communication Addr.: 0415H
Default: 0 Applicable Control Mode: P/S/T
Range: -800~800
Unit: mV
This parameter cannot be reset.