User manual

Chapter 7 Parameters ASDA-A User Manual
4th Edition 2005/11/30, HE03 © DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
7-30
P1 - 16 PO1L
1st Position Command for Pulse Communication Addr.: 0110H
Default: 0 Applicable Control Mode: Pr
Range: +/-max. cnt/rev
This parameter is used to set rotation pulse number of internal position 1.
Stroke1 = PO1H × (cnt/rev) + PO1L
P1 - 17 PO2H
2nd Position Command for Rotation Communication Addr.: 0111H
Default: 0 Applicable Control Mode: Pr
Range: +/-30000
This parameter is used to set rotation pulse number of internal position 2.
P1 - 18 PO2L
2nd Position Command for Pulse Communication Addr.: 0112H
Default: 0 Applicable Control Mode: Pr
Range: +/-max. cnt/rev
This parameter is used to set rotation cycle number of internal position 2.
Stroke2 = PO2H × (cnt/rev) + PO2L
P1 - 19 PO3H
3rd Position Command for Rotation Communication Addr.: 0113H
Default: 0 Applicable Control Mode: Pr
Range: +/-30000
This parameter is used to set rotation pulse number of internal position 3.
P1 - 20 PO3L
3rd Position Command for Pulse Communication Addr.: 0114H
Default: 0 Applicable Control Mode: Pr
Range: +/-max. cnt/rev
This parameter is used to set rotation cycle number of internal position 3.
Stroke3 = PO3H × (cnt/rev) + PO3L
P1 - 21 PO4H
4th Position Command for Rotation Communication Addr.: 0115H
Default: 0 Applicable Control Mode: Pr
Range: +/-30000
This parameter is used to set rotation pulse number of internal position 4.
P1 - 22 PO4L
4th Position Command for Pulse Communication Addr.: 0116H
Default: 0 Applicable Control Mode: Pr
Range: +/-max. cnt/rev
This parameter is used to set rotation cycle number of internal position 4.
Stroke4 = PO4H × (cnt/rev) + PO4L