User manual

Page 8
Temp. flue gas est.
@ comb. air temp 20ºC
°C ≈ 85-95
Available pressure for the Flue sys-
tem**
Pa 200
Max. flow temp. °C 90 90 90 90 90 90
Power supply V / Hz 230 / 50 230 / 50 230 / 50 230 / 50 230 / 50 230 / 50
Power consumption W 355 355 355 375 460 460
Protection class IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D
NOTES
* Emissions measured during unit certification
** Maximum combined resistance of flue gas and air supply piping at high fire.
*** CO
2
of the unit measured/set without the boiler door in place
**** Below a table is given in which the min. and max. gas supply pressures are mentioned acc. To EN437.
G25 min. = 20 mbar / max. = 30 mbar
G20 min. = 17 mbar / max. = 25 mbar
G31 > P
nom
= 30 mbar > min. = 25 mbar / max. = 35 mbar
G31 > P
nom
= 37 mbar > min. = 25 mbar / max. = 45 mbar
Boiler inbuilt features includes:
 Cascade control for up to 12 boilers ( requires flow temperature sensor at extra cost )
 Remote run & fault indication
 0-10 VDC ( input from others ) control connection ( requires flow temperature sensor at extra cost )
 Control for external calorifier primary pump ( pump not included ) via relay & sensor at extra cost ( see
page 21)
 Weather compensation control (with north facing outside detector at extra cost)
 Control for an external pump via relay at extra cost, (see page 21) external pump not included.
 Electronic Ignition.