User manual

Page 2
1 SAFETY GUIDELINES
This manual is written for:
The installer
System design engineer
The service engineer
The following symbol is used in this manual:
Read all these instructions before commencing installation.
Read the instructions before installation, to ensure that all work is done correctly.
Keep these instructions together with the user manual near the boiler for quick reference.
The appliance should be installed by a skilled installer such as GAS SAFE registered &
electrical work by a qualified person, all according to national and regional standards
Failure to comply with these regulations could lead to prosecution and deem the
warranty invalid. This appliance must be installed in accordance with the rules that apply
and only be used in an adequately ventilated space conforming to standards in place.
Without written approval of the manufacturer the internals of the boiler may not be
changed. When these changes are executed without approval, the boiler certification and
warranty is invalid.
Commissioning, maintenance and repair must be done by a skilled installer/engineer,
according to this manual and all applicable standards and regulations.
What should one do when there is the smell of gas:
Don't use any electrical equipment.
Don't press any switches.
Close the gas supply.
Ventilate the room (open the windows and/or outside boiler room doors).
Warn the installer immediately.
Read the instruction manual carefully before you install the boiler.
CAUTION THE BOILER CAN START UP WITHOUT WARNING ISOLATE THE BOILER BEFORE
ATTEMPTING ANY WORK
BEWARE SURFACES IN BOILER ROOMS CAN GET VERY HOT AND CAUSE INJURY
ALWAYS ADHERE TO YOUR OWN COMPANY’S HEALTH AND SAFETY RULES
YOUR SAFETY IS OF PARAMOUNT IMPORTANCE. BE AWARE OF WHAT IS HAPPENING AROUND
YOU AT ALL TIMES AND CONSIDER YOUR SAFETY AND THE SAFETY OF OTHERS.
Giving extra attention for the safety of persons and their surrounding.
The manufacturer / supplier is not liable for any damage caused by inaccurately following
any of these installation instructions. Only original parts may be used when carrying out
any repair or service works.