Operating instructions

2
Assembly and Operating Instructions
Introduction
Warranty
Structural modications and incorrect installation which are not in accordance with these and our other instructions can
result in serious injuries, e.g., crushing of limbs. Therefore, structural modications may only be carried out with our prior ap-
proval and strictly in accordance with our instructions, particularly the information contained in these Assembly and Operating
Instructions.
Any further processing of the products which does not comply with their intended use is not permitted.
The end product manufacturer and tter have to ensure that all the relevant current statutory, ocial and, in particular, EMC
regulations are adhered to during utilisation of our products, especially with regard to end product manufacture, installation
and customer advice.
The drives A80 - A280 and A80AE - A280AE are high-quality products with a broad range of features and advantages.
Please observe these Assembly and Operating Instructions when installing and setting the unit.
Intended use
The plug-in drives A80 - A280 and A80AE - A280AE are exclusively designed for indoor use for the operation of roller doors,
vertical lift gates, sectional doors and indirectly operated door systems as well as for special applications (subject to approval
from Becker-Antriebe GmbH). The plug-in drive must not be used in potentially explosive areas. If the drives are to be used
externally, special connection cables are required; PVC connection cables must be placed in a protective conduit. The plug-in
drives A80AE - A280AE may only be operated in connection with a suitable control unit. This control unit must be able to evalu-
ate the single-turn absolute value encoder in AE drives from Becker-Antriebe. Use for other purposes or for purposes beyond
the above constitutes improper use.
Other applications (e.g., hoisting devices, awnings, winders), uses and modications are not permitted in order to protect
the safety of the users and others since these actions can impair the system’s safety and carry the risk of personal injury and
property damage. Becker-Antriebe does not accept liability for damages or injury arising from such actions.
Always observe the information in these instructions when operating or repairing the system. Becker-Antriebe does not
accept liability for damages or injury resulting from improper actions.
Table of contents
Introduction ................................................................................................................................................................ 2
Warranty ..................................................................................................................................................................... 2
Intended use .............................................................................................................................................................. 2
Safety instructions ...................................................................................................................................................... 3
Product overview and dimensions................................................................................................................................. 4
Installation .................................................................................................................................................................. 5
Emergency manual operation ....................................................................................................................................... 5
Voltage switching ........................................................................................................................................................ 9
Electric connection to the control unit and connection diagram .................................................................................... 10
Checking the running direction ....................................................................................................................................11
Setting the door limit positions ................................................................................................................................... 12
Maintenance ............................................................................................................................................................ 14
Technical data .......................................................................................................................................................... 15