Installation guide

- 15 -
When you turn the unit on for the first time, you will
need to set the time.
Turn the knob to .
The days flash.
Press + or - to change the day, then press OK
to confirm and continue on to the next setting.
Repeat the operations to set the hours and minutes.
To leave the “time setting” mode, turn the knob.
Starting up
Minutes
Hours
Days
(1 : Monday… 7 : Sunday)
- 14 -
- Menu configuration
1-06
Choice of heat pump type
0 = Heat cool reversible heat pump (default)
Cool request
Heat request
RF 652
ONHEAT
- Description of the operating LEDs
34512
RF 652
Thermostat
cool input
Thermostat heat input
Com
Heat pump relay
common contacts
230 V
Power supply
230 V
S1
S2
On the RADIO TYBOX:
- Pres the button
i, the receiver is set to mode 2
- Turn the knob to AUTO to exit the association mode
- Cut off the power supply to the receiver and connect
it to the heat pump.
The S1 output controls
the thermostat’s cool input.
The S2 output controls
the thermostat’s heat input.