Owner's manual

A 24 IOM-DPCDPR-A: FEB 2014
|DAMPING________ (Setting of the solid temporary suppression of the process variable)
| \
| BACK (Return to Local Menu. If you will confirm this option,
| | you will come back to main tree of Local Menu)
| |
| | (Confirm one of the following values time constant across
| | longer press button ◙. After parameter confirmation
| | transmitter will confirm the party of command by the "DONE")
|
| 0 [S]
| 2 [S]
| 5 [S]
| 10 [S]
| 30 [S]
| 60 [S]
||
TRANSFEr_______ (Setting of the current output form)
| \
| BACK (Return to Local Menu. If you will confirm this option,
| | you will come back to main tree of Local Menu)
| |
| | (Confirm one of the following characteristics across
| | longer press button ◙. After parameter confirmation
| | transmitter will confirm the party of command by the "DONE")
| |
| LINEAR (Linear)
| SQRT (square root)
| SPECIAL (user’s )
| SQUARE (square)
|
% SQRT______ (Square root characteristic cut-of point setting)
| \
| BACK (Return to Local Menu. If you will confirm this option,
| | you will come back to main tree of Local Menu)
| |
| | (Confirm one of the following percent value across
| | longer press button ◙. After parameter confirmation
| | transmitter will confirm the party of command by the "DONE")
| |
| 0.0 %
| 0.2 %
| 0.4 %
| 0.6 %
| 0.8 %
| 1.0 %
LCD1 VARiable__ (Type of the process variable displayed on LCD1)
| \
| BACK (Return to Local Menu. If you will confirm this option,
| | you will come back to main tree of Local Menu)
| |
| | (Confirm one of the following option across
| | longer press button ◙. After parameter confirmation
| | transmitter will confirm the party of command by the "DONE")
| |
| CURRENT (On LCD1 will displayed current value in current loop)
| |
| |
| PERCENT (The percent value output signal will displayed on LCD1)