Owner's manual

A 12 IOM-DPCDPR-A: FEB 2014
5.2. DPC...- Measurement ranges and metrological parameters.
5.2.1. DPC..., Measurement ranges
N
Nominal measuring range
(FSO)
Minimum set range
Rangeability
Overpressure limit
(without hysteresis)
1.
0...1000bar (0...100MPa)
10bar (1MPa)
100:1
1200bar (120MPa)
2.
0...300bar (0...30MPa)
3bar (300kPa)
100:1
450bar (45MPa)
3.
0...160bar (0...16MPa)
1,6bar (160kPa)
100:1
450bar (45MPa)
4.
0...70bar (0...7MPa)
0,7bar (70kPa)
100:1
140bar (14MPa)
5.
0...25bar (0...2,5MPa)
0,25bar (25kPa)
100:1
50bar (5MPa)
6.
0...7bar (0...0,7MPa)
0,07bar (7kPa)
100:1
14bar (1,4MPa)
7.
-1...6bar (-100...600kPa)
300mbar (30kPa)
23:1
14bar (1,4MPa)
8.
0...2bar (0...200kPa)
100mbar (10kPa)
20:1
4bar (400kPa)
9.
0...1bar (0...100kPa)
50mbar (5kPa)
20:1
2bar (200kPa)
10.
-0,5...0,5bar (-50...50kPa)
50mbar (5kPa)
20:1
2bar (200kPa)
11.
0...0,25bar (0...25kPa)
25mbar (2,5kPa)
10:1
1bar (100kPa)
12.
-100...100mbar (-10...10kPa)
20mbar (2kPa)
10:1
1bar (100kPa)
13.
-15...70mbar* (-15...7kPa)
5mbar (0,5kPa)
17:1
0,5bar (50kPa)
14.
-7...7 mbar* (-700...700Pa)
1mbar (0,1kPa)
14:1
0,5bar (50kPa)
15.
0...1,3bar abs (0...110kPa abs)
50mbar abs (5kPa abs)
26:1
2bar (200kPa)
16.
0...7bar abs (0...7MPa abs)
0,07bar abs (7kPa abs)
100:1
14bar (1,4MPa)
17.
0...25bar abs (0...2,5MPa abs)
0,25bar abs (25kPa abs)
100:1
50bar (5MPa)
18.
0...70bar abs (0...7MPa abs)
0,7bar abs (70kPa abs)
100:1
140bar (14MPa)
* - only for transmitters without diaphragm seal,
5.2.2. DPC..., Metrological parameters
Accuracy max ± 0,075% for the basic range (0,16% for range 14)
Long term stability  accuracy for 3 years (for the nominal measuring range)
Error due to supply voltage changes max ± 0,002%(FSO)/1V
Thermal error max ± 0,08%(FSO)/10ºC
max ± 0,1% FSO/10C for n°12, 13, 14 ranges.
Thermal error for the whole thermal max ± 0,25%(FSO)
compensation range (max ± 0,4% FSO/10C for n°12, 13, 14 ranges.
5.2.3. DPC..., Pressure Connectors
M-type connector with M20x1.5 thread – see figure 5a,
P-type connector with M20x1.5 thread – see figure 6a,
CM30x2-type connector with flush diaphragm – see figure 7a,
G1/2 -type connector with G1/2” thread – see figure 8a,
GP -type connector with G1/2” thread,
CG1-type connector with G1” thread and flush diaphragm – see figure 8e,
RM-type connector with M20x1.5 thread and radiator
RP-type connector with M20x1.5 thread and radiator