Installation Guide

See safety information before proceeding. Routine maintenance should be done at least once a year.

• Never use solvents, thinner or harsh chemicals when cleaning the fan.

• Do not allow water to enter the motor.

• Do not immerse metal parts in water.

• Do not immerse resin parts in water over 140º Fahrenheit.

Turn off power source. Review all safety precautions.

CARE AND MAINTENANCE

1. To remove grille , squeeze springs and pull down.

2. Clean the grille in a sink and dry with a cloth.

3. Remove dust and dirt from the fan body with a vacuum

cleaner.

4. Dampen cloth with dust detergent and wipe the fan body

. Then wipe dry with a clean cloth.

5. Replace grille back onto fan body .

6. Turn on power source to operate fan again.

Vacuum

cleaner