Instructions / Assembly

6
Model: RAD80L
ASSEMBLY INSTRUCTIONS
1. Mounting the fan between the joists
a. Insert either the 12 in. suspension brackets
❻
or 14 in. suspension brackets
❺
to the duct side
and back of the fan body
❶
, depending on the
distance between the joists.
b. Insert the fan body
❶
between joists. Make sure
the fan body is level and perpendicular with the
joist, and ush with ceiling surface.
c. Allow for thickness of the ceiling board used in
your application. Fan body
❶
should be ush
with ceiling board.
d. Secure the suspension brackets to joists with the
wood screws
C
.
e. Secure the suspension brackets to fan body
❶
with the short machine screws
A
.
f. Remove tap before connecting the duct as
shown in Figure 1-2.
Hardware
A
Short Machine Screw (M4x12) Qty.4
C
Wood Screw(
∅
4x14) Qty.8
5
6
A
C
1
1-2
1-1