Installation & Operating Manual
11
Model: RAD80L
CARE AND MAINTENANCE
2
3
B
2
2. Remove Machine Screw
B
.
Hardware
B
Machine Screw (M5x12) Qty.1
Routine maintenance must be done every year.
CAUTION:
• Make sure power is switched off at service panel
before servicing the unit.
To replace lamp
• Allow lamp to cool before replacing.
1
2
To clean fan, disassemble using the following steps:
1.
Remove Light Lens
3
cover
and Lamp.
• Use bulb reted up to 60 watts only.