Installation Guide

See safety information before proceeding. Routine maintenance should be done at least once a year.

• Never use solvents, thinner or harsh chemicals when cleaning the fan.

• Do not allow water to enter the motor.

• Do not immerse metal parts in water.

• Do not immerse resin parts in water over 140º F.

CARE AND MAINTENANCE

TTo remove grille, squeeze springs and pull down.

Wash and clean grille with non-abrasive kitchen

detergent. Then wipe dry with a new cloth.

Remove dust and dirt from the fan body with a

vacuum cleaner.

Using a cloth dampened with non-abrasive kitchen

detergent, remove dust and dirt from the fan body.

Then wipe dry with new cloth.

Replace the grille back onto the fan body.

Turn on fan switch to operate fan again.

TURN OFF POWER SOURCE. REVIEW ALL SAFETY PRECAUTION.

Vacuum

cleaner