User guide

Home Installation

1. Take the provided Stereo Audio Cable and connect the single 3.5 mm

(1/8”) connector to the AUDIO OUT connector at the rear of the Home

Dock.

2. Connect the white left and red right Stereo Audio Cable connectors

(“L” and “R” are also on each respective tip) to any available input

other than PHONO on your home stereo system. (If your stereo’s

inputs are marked red and black, simply connect the white plug to the

black input.)

3. Turn the home stereo system On, and make sure you select the correct

input on your stereo system for the AUX In or LINE In connection.

AUDIO OUT ANT IN DC IN