User guide

11
If the “NO SIGNAL” message persists, you can use SKYFi3’s antenna
aiming feature. Press the Menu button and use the arrow but-
tons and Play/Pause to select “Settings,” “Setup,” and “Antenna
Aiming.” Slowly turn and tilt the antenna, pausing in between for
approximately five seconds to allow the signal to be received. The
signal bars on the display shown below will change accordingly.
Find the position that shows at least four bars on either “satellite”
or “terrestrial.”
In many areas in the United States, it may be
possible to receive a terrestrial signal indoors
without having the antenna outside or having
to go through a window. If you do not have a
good terrestrial signal, you must aim the unit
to face the sky in a south/southwest direction
to get a signal. The antenna is weatherproof
and may be mounted outside.
If you need more cable length, you can remove the antenna from
its base and unwind the antenna cable from the hub to the de-
sired length. You can also purchase a 50' antenna extension cable
(SA10006) from www.shopdelphi.com.
For indoor use with low signal, we recommend purchasing the
Delphi Signal Repeater (SA10116-11P1). It allows you to use your
SKYFi3 indoors, regardless of the XM signal strength, just about
anywhere in your house or office.