Owner's Manual

Table Of Contents

PAGE 1
PAGE 2
PAGE 3
1. Connect the cable marked “TO XM RADIO” on the accessory into the antenna-in jack on the XM radio. 2. Connect the cable marked “TO #M ANT” on the accessory to the vehicle antenna cable (adapter tay bs required). Connect the vehicle radio cable lead to the cable marked "TO FM RADIO” on the accessory (adapter may be required). . Connect the XM Antenna into the jack marked “XM ANT” located on the side of the cassowary. . Your Delphi XM FM Direct Accessory receives power from your XM radio.
PAGE 4
Turning on the Delphi XM FM Direct Accessory With ignition in the accessory position, the Delphi XM FM Direct Accessory is always on in a standby condition, When you wir an your XM radio, the accessory will automatically switch the vehicle stereo input from your FM antenna to an XM signal.
PAGE 5
PAGE 6