Install guide

8
3. Turn off the radio and SKYFi2
Receiver. Disconnect all cables.
4. Find a place where you can mount
your SKYFi2 Vehicle Adapter
where it is most convenient for
you to use. It should be mounted
to a hard, flat surface below the
top of the dash within easy reach.
Choosing a lower location makes
it easier to manage the cables. A
lower location also ensures
SKYFi2 will not cause interference
with other FM radios outside the
vehicle. See figure 4.
5. The SKYFi2 Vehicle Adapter Kit
has two mounting options: flat
mount or swivel mount.
a. Flat mount: Use the included Velcro pads or extra adhe-
sive pad, attaching them to the back of the SKYFi2 vehicle
cradle and then to a flat surface in your vehicle. Do not
install the mount on a leather surface.
Figure 4.
SKYFi2 install guide layout 6/20/06 4:47 PM Page 9