Specifications

In the Cursor mode, you have a cursor icon displayed that you can use
to pan around the plotter. The information displayed at the bottom of
the screen provide you with the heading and distance the cursor is at
from your present position. In the Cursor mode you can:
• scroll around the plotter, seeing available information for areas on
the plotter not displayed around your present position,
• create a POI for the position indicated by the cursor,
• create a GOTO route to the position indicated by the cursor
location, or
• get detailed information about POI’s you have saved found at the
cursor location.
These options will be explained in the section of this manual on creating POI’s and GOTO
routes.
To enter the Cursor mode, use the
Arrow joystick to move the cursor. As soon as the
joystick is moved, a crosshair cursor is displayed and the bottom of the screen changes to
provide information about the cursor position.
To exit the cursor mode, press the
ESC button. When pressed, the Plotter screen is
returned to the Position mode, with your present position displayed in the center of the
screen.
Showing or Hiding Map Information
The information at the bottom of the Plotter screen provides you with information that can
be used to assist you in navigating to your destination. However, you may want to display
more area and do not need this information. The eXplorist gives you the capability to turn
this information on or off.
1. While viewing the
Plotter screen, press MENU.
2. With
Hide Map Info or Show Map Info highlighted, press ENTER.
Navigation Screens
16
1.60mi
077
o
M
6.9
M
I
Cursor
Ranger
CA
Par
The Plotter screen in the
Cursor Mode
1.60mi
351
o
M
3.9
M
H
Heading
Speed
OakTree
QUAIL
1.60mi
OakTree
QUAIL
MARKER
The Plotter screen with
map information shown.
The Plotter scr
een with
map infor
mation hidden.