Manualshelf

Specifications

ManualsBrandsDelphi ManualsGPSPortable Navigation Nav100
11121314151617181920
14
Accessing the Navigation Screens
The eXplorist has three navigation screens as well as a Satellite Status screen that can be
accessed by pressing the
NAV button. Each screen provides the same information in a
different format giving you the choice of choosing the screen that best suits your needs.
Tip: The ESC button will also set through the navigation screens, just like the NAV
button but in the reverse order.
Plotter Screen
The first, and most commonly used screen is the Plotter screen. The Plotter screen displays
your position, as well as POI’s you have saved a for the area displayed.
Highlights of the
Plotter screen:
• Use the zoom in/out buttons to change the scale.
• The arrow cursor in the middle of the display indicates your position, and if moving,
points in the direction you are heading.
• Press
MARK to save your position.
• Use the
Arrow joystick to move the cursor. The arrow cursor changes to a crosshair
cursor with any available information about the position of the cursor at the bottom of
the display. You can also save the position of the crosshair cursor as a POI by pressing
the
MARK button.
• Press ESC when you are done panning with the crosshair cursor to display your present
position with the arrow cursor.
• Press
MENU and select Hide Map Info or Show Map Info to turn the information
boxes at the bottom of the screen off or on.
• Press
MENU and select Customize page to change the information displayed at the
bottom of the screen.
• Press
MENU and select Orientation to change the orientation of the screen.
Navigation Screens