Owner`s manual
Delphi NAV200 
14 
Section 5  Getting Started 
 Warning: For your safety, program the Delphi NAV200 and enter information 
about your destination BEFORE you start your journey. Do not operate Delphi 
NAV200 while driving. 
Powering Up 
Power on  Press the Power button located on the 
lower left side for at least one second. 
Power off  Press the Power button located on the 
lower left side for at least one second. 
Note: The Delphi NAV200 will continue to charge if connected to a 12 V power 
jack even when powered down. 
Enter screen saving mode  Press Screen Saver Mode button. The 
device continues to operate, but the 
screen will appear blank. 










