User's Manual

Note:
BT pairing is not allowed when the vehicle is in motion. Only one phone can be paired to the HU’s media
system at one time. Once pairing is successful, there will be no need for further pairing of the same
phone, unless the said phone is removed from the list of paired devices on the HU. For every phone
paired to the HU, BT connection will be established automatically once BT is enabled on the phone.
Corresponding HU HMI during BT pairing process:
Fig. 3 BT Pairing HMI Screens
Device Connected: Device currently connected to the HU, e.g. “iPalmmate”. Only one device can be
connected to the HU at one time.
Device Paired: Devices previously connected to the HU will be saved to the paired device list.
Once the phone has been connected to the HU, contact list and call history will be automatically
downloaded to the HU. Switching between “Settings”, “Call Record”, “Contacts” and “Keypad” menu by
pressing Left and Right button on the ICP. Press Up and Down button for page-up and page-down in
“Call Record” or “Contacts” lists.
Media through BT