User's Guide

• Fixed ParkView Backup Camera Guidelines

Fixed ParkView Backup Camera Guidelines Your vehicle

may be equipped with the ParkView Rear Back Up

Camera Fixed Guidelines that allows you to see fixed

guidelines over the ParkView Back up camera display

whenever the shift lever is put into REVERSE. The image

will be displayed on the radio touchscreen display along

with a caution note to “check entire surroundings” across

the top of the screen. After five seconds, this note will

disappear. To make your selection, press the “ParkView

Backup Camera Fixed Guidelines” button on the touch-

screen, until a check-mark appears next to setting, indi-

cating that the setting had been selected.

• Forward Collision Warning — If Equipped

The Front Collision Warning (FCW) feature provides an

audible and/or visual warning to potential forward

collisions. The feature can be can be set to Far, or set to

Near. The default status of FCW is the Far setting. This

means the system will warn you of a possible collision

with the vehicle in front of you when you are farther

away. This gives you the most reaction time. To change

the setting for more dynamic driving, select the Near

setting. This warns you of a possible collision when you

are much closer to the vehicle in front of you. To change

the FCW status, press and release the “Near” or “Far”

button.

• Front Collision Sensitivity — If Equipped

The Front Collision Warning (FCW) feature can be set to

Far, set to Near or turned Off. The default status of FCW

is the Far setting. This means the system will warn you of

a possible collision with the vehicle in front of you when

you are farther away. This gives you the most reaction

time. To change the setting for more dynamic driving,

select the Near setting. This warns you of a possible

collision when you are much closer to the vehicle in front

UCONNECT SETTINGS 55