User's Manual

Owner´s Manual DEA601 Radio
38 | P a g e
The warning inputs are:
 Engine Oil Overtemp (primary warning)
 Stop Engine (secondary warning)
 Warning logic has hysteresis built in to prevent rapid, intermittent
activation of this warning. When the message for Oil Temp warning
is no longer present then the warning condition becomes inactive.
 English and SI gauges are available.
If "NA" message is transmitted the gauge face be removed leaving only a
black background.
Transmission Oil Temp Gauge
The gauge display transmission oil temp as measured at input.
 The range is from 150-300 °F and 70-150 °C.
 +5° over scale is the maximum needle position.
 If "NA" message is transmitted the gauge face be removed leaving
only a black background.
 No warning states.
DPF Status Gauge
The range is from clean to full.
Turbo Boost Gauge
Gauge display the turbo boost pressure.
 The range of the gauge is form 0-80 PSI and 0-5.5 BAR.
 +5° over scale is the maximum needle position.
 No warning states.
 English and SI gauges are available.
Fuel Economy Gauge
Digital part of the gauge display calculated average fuel economy from
CECU.
Analog part of the gauge displays the instantaneous fuel economy relative to
the average fuel economy.
 The symbol “-”represent a 0 MPG (or 0 L/100km).
 The symbol “+”represent 2x the average fuel economy.
In case of missing data or error message the needle is positioned vertically
and the digital part of the gauge display "0.0".
Gauge States
Each gauge is capable of 3 different states (when available):
1. Regular State
This state include Metric and English rates
Figure 76 Regular KW Oil Temp Gauge state Art Work (°F)
2. Warning States
In this state the Gauges Turn Red
o If Gauge reaches out of range condition, the virtual gauge
Pop-Up larger on the screen. Pop-up may return to its
original state per user interaction.