3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features (CD player with changer only) This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Title Page Using the hands-free phone system P.
3-3. Using the hands-free phone system (for cellular phone) n Trademark owned by Bluetooth SIG. Inc. n Certification for the hands-free phone system FCC ID: HYQBTAU01A IC ID: 1551A- 3 NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-3. Using the hands-free phone system (for cellular phone) FCC WARNING: Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone) n Audio unit Displays such items as message, name, and phone number Lower-case characters and special characters, such as an umlaut, cannot be displayed. Press and hold: Displays information that is too long to be displayed at one time on the screen 3 Selects speed dials Displays Bluetooth® connection condition If BT is not displayed, the hands-free phone system cannot be used.
3-3. Using the hands-free phone system (for cellular phone) n Steering wheel Type A Volume The voice guidance volume cannot be adjusted by using this button.
3-3. Using the hands-free phone system (for cellular phone) Type B Volume The voice guidance volume cannot be adjusted by using this button.
3-3. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the handsfree phone system without checking the display or operating . n Operation procedure when using a voice command Press the talk switch and say the command for a desired function. (→P.
3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1 Press the off-hook switch or the talk switch.
3-3.
3-3.
3-3.
3-3. Using the hands-free phone system (for cellular phone) n Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. n When using a voice command For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say a command correctly and clearly.
3-3.
3-3. Using the hands-free phone system (for cellular phone) Dialing by inputting a name STEP 1 Press the talk switch and say “Dial by name”. STEP 2 Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk switch while the desired name is being read aloud. STEP 3 Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.
3-3. Using the hands-free phone system (for cellular phone) Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone. b. Press the off-hook switch*1. c. Press the talk switch and say “Call Transfer”*2.
3-3. Using the hands-free phone system (for cellular phone) The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” by using a voice command or . Storing the number in the phone book: Select “Store” by using a voice command or . Deleting: Select “Delete” by using a voice command or . 3 n Call history n When talking on the phone l Do not talk simultaneously with the other party. l Keep the volume of the received voice down. Otherwise, voice echo will increase.
3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for registered cellular phones: n Functions and operation procedures To enter the menu for each function, follow the steps below by using a voice command or : l Registering a cellular phone 1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone” l Selecting the cellular phone to be used 1. “Setup” → 2.
3-3. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used STEP 1 Select “Select Phone” by using a voice command or . Pattern A STEP 2 Select the cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or : a. Press the talk switch and say the desired phone name. Pattern B STEP 2 Select the cellular phone to be used by using .
3-3. Using the hands-free phone system (for cellular phone) STEP 3 Press the talk switch or select “Record Name” by using , and say a new name. STEP 4 Select “Confirm” by using a voice command or . Listing the registered cellular phones Selecting “List Phones” by using a voice command or causes the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”.
3-3. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP 1 Select “Delete” by using a voice command or . Pattern A STEP 2 Select the cellular phone to be deleted by either of the following methods and select “Confirm” by using a voice command or : a. Press the talk switch and say the name of the desired cellular phone. Pattern B STEP 2 Select the desired cellular phone to be deleted by using .
3-3. Using the hands-free phone system (for cellular phone) Pattern B STEP 2 Select a 4 to 8-digit number by using . The number should be input 1 digit at a time. STEP 3 When the entire number to be registered as a passkey has been input, press once again. n The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.
3-3. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: n Security setting items and operation procedure l Setting or changing the PIN (Personal Identification Number) 1. “Setup” → 2. “Security” → 3. “Set PIN” l Locking the phone book 1. “Setup” → 2. “Security” → 3. “Phonebook Lock” l Unlocking the phone book 1. “Setup” → 2. “Security” → 3.
3-3. Using the hands-free phone system (for cellular phone) n Changing the PIN STEP 1 Select “Set PIN” by using a voice command or STEP 2 Enter the registered PIN by using a voice command or STEP 3 Enter a new PIN by using a voice command or When using . . . , input the code 1 digit at a time. Locking or unlocking the phone book STEP 1 Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock (Phbk Unlock)” by using a voice command or STEP 2 .
3-3. Using the hands-free phone system (for cellular phone) Setting voice guidance volume STEP 1 Select “Guidance Vol” by using STEP 2 Change the voice guidance volume. . To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization 3 Select “Initialize” and then “Confirm” by using STEP 2 Select “Confirm” by using Interior features STEP 1 . .
3-3. Using the hands-free phone system (for cellular phone) n Initialization l The following data in the system can be initialized: • Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code l Once the initialization has been completed, the data cannot be restored to its original state.
3-3. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: l Adding a new phone number 1. “Phonebook” → 2. “Add Entry” l Setting speed dial 1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)” l Changing a registered name 1. “Phonebook” → 2. “Change Name” l Deleting registered data 1. “Phonebook” → 2. “Delete Entry” l Deleting speed dial 1. “Phonebook” → 2.
3-3. Using the hands-free phone system (for cellular phone) n Adding procedure STEP 1 Select “Add Entry” by using a voice command or STEP 2 Use one of the following methods to input a telephone number: . Inputting a telephone number by using a voice command STEP2-1 Select “By Voice” by using a voice command or . STEP2-2 Press the talk switch, say the desired number, and select “Confirm” by using a voice command.
3-3. Using the hands-free phone system (for cellular phone) Inputting a phone number by using STEP2-1 Select “Manual Input” by using STEP2-2 Input a phone number by using . , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call history 3 STEP2-1 Select “Call History” by using a voice command or STEP2-2 Select “Outgoing” or “Incoming” by using a voice command or .
3-3. Using the hands-free phone system (for cellular phone) STEP 3 Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or : a. Press the talk switch and say the desired name. b. Select “Record Name” by using , and say the desired name. STEP 4 Select “Confirm” by using a voice command or . In STEP 3 , selecting “Set Speed Dial (Speed Dial)” instead of “Confirm” registers the newly added phone number as a speed dial.
3-3. Using the hands-free phone system (for cellular phone) STEP 3 Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by using a voice command or . b. Press and hold the desired preset button. Changing a registered name STEP 1 Select “Change Name” by using a voice command or STEP 2 Select the name to be changed by either of the following methods. 3 a.
3-3. Using the hands-free phone system (for cellular phone) Deleting registered data STEP 1 Select “Delete Entry” by using a voice command or . Pattern A STEP 2 Select the data to be deleted by either of the following methods, and select “Confirm” by using a voice command or : a. Press the talk switch, and say the name of the desired phone number to be deleted. b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.
3-3. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available.
