User's Manual

PNrev8 Confidential 6
 The Signal LED flashes green once every three
seconds when the inReach is actively tracking GPS
satellites or Iridium® satellites to send a message of
any type.
 The Signal LED flashes red once every three
seconds when the device is in a message sending
mode but is unable to obtain a GPS or Iridium
satellite location. Both systems must be in view for
messages to transmit. The Signal LED will flash red
until the message is successfully transmitted or
cancelled.
 The Signal LED flashes red once every three
seconds when the inReach fails to receive a
successful transmission confirmation message from
the satellites. The Signal LED will flash red until the
message is successfully transmitted or cancelled.
Using the inReach with a
PN-60w
When you pair your DeLorme inReach with the
DeLorme Earthmate PN-60w, you have the best of both
worlds—a powerful, rugged handheld GPS device and
the ability to send and receive messages wherever you
go— whether you want to share your trip, check in with
loved ones, or send an SOS in an emergency.
Sync Account Info
Log in to your account on explore.delorme.com and
view your inReach details. Connect the PN-60w to your
computer, and then click the Sync button to send your
account info to your device.
Pair the inReach and PN-60w
Open the inReach page on the PN-60w, press MENU,
select Pair DeLorme inReach and press ENTER. With
the inReach powered off, press and hold its Power
button until the LED flashes green. Then, press ENTER
on the PN-60w.