INTRO +I 22-12-2004 17:36 Ventilatori Fans Ventilateurs Ventilatoren Ventilatoren Ventiladores Ventilação ∞¡∂ªπ™∆∏ƒ∂™ Pagina 1
INTRO +I 22-12-2004 17:36 Pagina 3 8 10 7 6 5 4 3 1 9 11 13 12 2 14 15
GB 5-04-2005 GB 9:30 Pagina 6 Description/Assembly DESCRIPTION 1) Front guard 2) Safety screw plus nut 3) Guard surround 4) Propeller 5) Propeller fixing screw 6) Screws 7) Rear guard 8) Handle 9) Motor unit + shaft 10) Swing control 11) ON/OFF/MIN/MED/MAX knob 12) Power cable 13) Tilt control 14) Base 15) Screws ASSEMBLING THE FAN • Assemble the fan as follows: • Remove the four screws and washers (15) from the base of the shaft (9), then attach the motor unit and shaft (9) to the fan base (14) usin
GB 5-04-2005 9:30 Pagina 7 Operation/Maintenance OPERATION • Plug the appliance into the mains. • Turn the ON/OFF knob (11) to the required position (Min/Med/Max). • To turn the appliance off, turn the ON/OFF knob (11) to "0". For "swing" operation, screw up the swing control (10) clockwise or unscrew it anticlockwise as required. To adjust the tilt of the fan, use the tilt control (13) on the top of the shaft. This should be done with the fan off only.
