Use and Care Manual

7
READY light illuminates.
- Place the food on the cooking plate.
- Carefully close the lid.
- Exact cooking time will be a matter of taste. It will also
depend on type of meat or vegetables used.
Please note: in contact grill mode, this appliance is
suitable for cooking thin steaks, slices of bacon, hamburgers,
and thin slices of vegetables, sh and chicken.
The food's thickness should not exceed 0.6 in (1.5 cm) for
meat, sh, or 0.4 in (1 cm) for vegetables. Overly large foods
will make it impossible for the appliance to stay completely
closed during cooking operation, compromising safe
operation and cooking performance.
Please note: The green READY light will cycle on and
o during the cooking process to indicate that the correct
temperature is being maintained.
Please note: The lid must be closed at all times when
cooking.
CLEANING AND MAINTENANCE
User maintenance
- Before cleaning, ensure the On/o switch is set to the
OFF position and then remove the power plug from the
power outlet.
- Allow your appliance to cool a bit before cleaning. The
appliance is easier to clean when slightly warm.
- Always clean your appliance after each use to prevent
the buildup of any remaining foods. Wipe the cooking
plates and drain hole with a soft cloth to remove food
residue.
- Empty the oil tray. It can be washed by hand or in the
dishwasher.
Important! DO NOT IMMERSE THE APPLIANCE IN
WATER OR ANY OTHER LIQUID.
Non-stick coating
Cooking on a non-stick surface minimizes the need for oil,
as food does not stick and cleaning is easier. When cleaning
the non-stick coating, do not use metal (or other abrasive)
scourers.
Wash with warm soapy water. The cooking plates are dish-
washer safe, although frequent washing in a dishwasher
could reduce the properties of the coating. It is therefore
recommended to clean the outside of the cooking plate with
a soft sponge or cloth dampened with water and mild deter-
gent. Remove stubborn residue with a non abrasive plastic
scouring pad or nylon washing brush.
STORAGE
To store your appliance:
- Ensure the On/o switch is set to the OFF position and
then unplug the power cord from the power outlet.
- Allow the appliance to fully cool down.
- Set the plates into the locked position.
- Wrap the power cord in the cord wrap area underneath
the appliance.
- Store on a flat, dry, level surface.