Installation manual

DRY MODE
SINGLE SPLIT
10 English 11/2002
SLEEP MODE
Press the MODE button until displaying the COOL ()
or DRY ( ) mode.
To set the requested temperature.
Press the SLEEP ():button:the set temperature will be
increased by 1°C in one hour and 2°C in two hours.The
appliance will then hold the temperature until switching off
(after 6 hours).
DEHUMIDIFICATION MODE
Press the MODE button until displaying the DRY ()
mode.
The appliance will start according to the room tempera-
ture and the set temperature:
• If the room temperature is lower than the set tempera-
ture, the compressor, the outdoor unit and the indoor
unit will stop.
• If the room temperature is within ± 2°C of the set tem-
perature, the appliance will start in dehumidification
mode.
• If the room temperature is more than 2°C above the set
temperature, the appliance automatically starts in cooling
mode.
U I A
SLEEP MODE
U I A