PAC L90 MODEL PORTABLE AIR-CONDITIONER Register this product on-line and receive a free trial issue of Cook's Illustrated. Visit www.prodregister.com/delonghi. Visit www.delonghi.com for a list of service centers near you. (U.S. Only) Enregistrez ce produit en ligne et recevez un numéro gratuit de Cook's Illustrated. Visitez www.prodregister.com/delonghi. Visitez www.delonghi.com pour y voir une liste des centres de réparation proches de chez vous. (É.-U.
PA R T S A N D A C C E S S O R I E S 5 1 2 4 6 7 8 9 3 • See description at page 3 for english • Véase d e s c r i p c i ó n a l a pág 35 para español • • Vo i r d é s c r i p t i o n à l a p a g e 1 9 p o u r l e Fra n ç a i s Ve d i d e s c r i z i o n e a p a g i n a 5 1 p e r l ’ i t a l i a n o 11 10 12 13 18 14 15 BOO ST SWING 19 2 SPEED 16 17
IMPORTANT SAFEGUARDS • Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many eventualities as possible. Caution and common sense should be used when operating and installing this air conditioner. • This appliance has been manufactured to cool and dehumidify domestic environments and should not be used for other purposes. • It is dangerous to alter or modify the unit's characteristics in any way.
What are the Pinguino portable air conditioners? D uring the summer, you feel comfortable at a temperature of between 75 and 81°F (24 and 27°C) with a relative humidity of about 50%. An air conditioning unit removes excess moisture and heat from the room where it is located. Compared with installed models, portable air conditioning units have the advantage that they can be moved from one room to another in the home or be transported from one building to another.
Installing your por table air-conditioner ELECTRICAL CONNECTIONS Before plugging the appliance into the electrical socket, check that: • the power supply corresponds to the value indicated on the rating plate on the back of the appliance; • the socket and electrical circuit are adequate for the appliance; • the socket matches the plug. If this is not the case, have the plug replaced; • the socket is adequately grounded.
Installing your por table air-conditioner 4.17 inches (106 mm) • Open the French window slightly and position the outlet 12 as shown in figure C and C1. • Use the suction pads 13 provided to hold the two parts of the window together (fig. D and D1). in the window pane F in the wooden kickboard of a French window in the wall: you are recommended to insulate the section of wall using suitable insulation. Keep the air hoses as short and free of curves as possible to avoid constrictions.
Control panel THE CONTROL PANEL N R M OP Q T L S I H B A F ED C G DESCRIPTION OF THE CONTROL PANEL A ON/OFF button B Mode selection button Conditioning, Boost, Fan mode with air filtration, Smart C Air conditioning mode indicator light D Boost mode indicator light E Fan mode with air filtration indicator light F Sleep function indicator light G Smart function (indicator lights C/D/E) H Increase temperature/programmed operating time button I Timer in operation indicator light L Display Displays th
Operation TURNING THE APPLIANCE ON Plug the appliance into the socket. Two lines appear on the display indicating that the appliance is in standby. You can control the appliance with the remote control (see page 10) or with the control panel. OPERATION WITH CONTROL PANEL Press the ON/OFF button (A) (when turned on, the air conditioning unit starts operating in the same mode as when it was turned off).
Operation BOOST MODE The BOOST mode is used to obtain rapid cooling. The fan is set to high speed and the temperature is automatically set to 64°F (18°C). The boost light (D) on the control panel comes on and the display will show . FAN MODE WITH AIR FILTRATION Adjust fan speed by pressing the SPEED button (R) as described for the air-conditioning mode. Remember that the higher the speed, the more air is filtered. If you select "Min" speed, less air is filtered but the appliance is also less noisy.
The remote control THE REMOTE CONTROL Inserting/replacing batteries (included) • Remove the back cover (see figure). • Insert two new batteries (not rechargeable) making sure the (+) and (-) are in the correct positions. • Replace the back cover. NB: Alkaline batteries should be used (LR03 AAA type). When replacing or disposing of the remote control, the batteries must be removed and disposed of according to the legislation in force, being harmful to the environment.
Description of the remote control THE REMOTE CONTROL A. MODE button Selects the operating mode (air conditioning, boost, air filtration, smart). B. Buttons for SETTING THE ROOM TEMPERATURE Set room temperature or program the timer. I H A BOO ST B G B F SWING THE DISPLAY E D SPEED C Signal transmission Air-conditioning indicator Air filtration indicator BOOST indicator SMART indicator SLEEP indicator Automatic fan speed High fan speed C.
Functions AIR-CONDITIONING MODE • Press the button to turn the appliance on. • A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. • Press the MODE button a number of times until the air-conditioning symbol appears on the display. • Now set the temperature using the buttons. • To select fan speed, press the “SPEED” button repeatedly until the required fan speed is selected (automatic, high, medium, low).
Functions BOOST FUNCTION BOOST function is used to obtain rapid cooling. The fan is set to high speed and the temperature is automatically set to 64°F (18°C). To select BOOST function, proceed as follows: • Press the button to turn the appliance on. A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. • Press the BOOST button to set the function. The symbol is displayed. • To go back to the previous mode, press the BOOST button again.
Self diagnosis/Troubleshooting SELF DIAGNOSIS The appliance has a self diagnosis system to identify a number of malfunctions. IF THE DISPLAY SHOWS … LOW TEMPERATURE (frost prevention) pf …WHAT SHOULD YOU DO? When the appliance is operating in air conditioning mode, this device prevents the formation of ice. The appliance starts up again automatically when the defrosting process is completed. PROBE FAILURE (The probe is damaged) If this alarm appears, contact the service centre.
Tips To get the best from your air conditioning unit, follow these recommendations: • close the windows and doors in the room to be air conditioned. • Never use the appliance in very damp rooms (laundries for example). • Never use the appliance outdoors. The only exception is when the appliance is installed through a hole in the wall. In this case, you are recommended to leave a slight draught through a door or window to guarantee correct ventilation.
Cleaning and Maintenance Before cleaning or maintaining, turn the appliance off by pressing the ON/OFF button (A) or button (I) on the remote control and always unplug the appliance from the socket. CLEANING THE CABINET You should clean the appliance with a slightly damp cloth then dry with a dry cloth. For safety reasons, never wash the air conditioning unit with water. Precautions Never use petrol, alcohol or solvents to clean the appliance. Never spray insecticide liquids or similar.
Technical specification TECHNICAL SPECIFICATION LIMIT CONDITIONS Room temperature range of the air-conditioned space 64-95°F (18 - 35°C) Power supply voltage Max. power input during air conditioning Refrigerant Cooling capacity Appliance dimensions: • width 19.9 inc. • height 31,4 inc. • depth 17,3 inc.
Limited Warranty De’Longhi is the distributor of Kenwood home appliances. This warranty applies to all home appliances with De’Longhi or Kenwood brand names. FOR CONTIGUOUS UNITED STATES ONLY Limited Warranty We warrant each De’Longhi AIR CONDITIONER to be free from defects in material and workmanship.
