User Manual
12
TM
The display shows "cf"
The lter has reached the pre-dened
number of hours
Replace the lter and reset the alarm.
To reset the CF alarm, in rapid
succession insert the plug and touch
and hold the ON/STANDBY (A) button
on the unit for at least 10 seconds until
you hear a long beep.
The display shows "Ht" or "It" blinking
The internal temperature is too high.
The air intake or outlet grill is
obstructed
Check the appliance is correctly
positioned respecting the minimum
distances from the wall, or objects, as
indicated in the instruction manual, if
not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet
and let the appliance cool down. After
few minutes plug the appliance again.
If the appliance doesn't work
please
contact Customer Service
The display shows "Fi"
The fan motor does not work Disconnect the plug from the outlet.
After few minutes plug the appliance
again. If the problem persists
please
contact Customer Service