User Manual

11
touch and hold the ON/STANDBY (A) button on the unit for at
least 10 seconds until you hear a long beep.
The lter is designed to last up to 9 months, based on 8 hours
usage a day, at medium working load.
Please note: the indicator is a guide and you may
need to replace the lter more frequently, depending on the
air quality conditions.
PROBLEM CAUSE SOLUTION
The display shows "pf" and emits
a beep
Temperature sensors are not working
properly
Please contact Customer Service
Product doesn’t turn on Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
Use the “+” button to increase the set
temperature
The appliance goes o unexpectedly Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
Use the “+” button to increase the set
temperature or turn o timer function.
A dot is ashing on display, emits a
beep and unit is o
The tip-over switch has been activated Use the “+” button to increase the set
temperature or turn o timer function.
Make sure the appliance is standing up-
right on a at surface. If the appliance
doesn’t work please contact Customer
Service
TROUBLESHOOTING