instructions Steam Iron FHX3 Please keep your instructions for future reference
Description Super steam button Water spray button Steam regulator Water tank opening Water spray nozzle Indicator light Water tank Cable winder Sole plate Thermostat dial Water filling jug Steam iron 2
Thank you for choosing this steam iron.To get the very best out of your new appliance it is advisable to read these instructions before using it.This will ensure that you gain optimum results and use the appliance safely. About your appliance The appliance uses normal tap water. If the water in your area is very hard, mix half tap water with half distilled water. Do not use chemicals or detergents such as fragrances or scale removers in the water tank as this could cause damage.
Remember that the steam function can only be used when the thermostat is in the position. Dry ironing • Plug in the iron and select the temperature, if there is water in the tank, position the steam regulator on the dry position (fig. 1). • Wait until the indicator light goes off showing that the required temperature has been reached. • If the fabric to be ironed is slightly damp or you iron fast, you can use a higher temperature.
After ironing To extend the working life of the iron, whenever you finish ironing, you are recommended to empty the tank as follows: • Unplug from the mains socket. • Open the cover and empty the iron, holding it point downwards and shaking it gently over a basin or sink. • To dry the remaining moisture, turn the iron on again with the thermostat dial in the maximum position for about two minutes with the steam regulator in the position. • Unplug from the mains socket and allow to cool.
Safety Warnings • This appliance is designed to iron. Use with extreme care to avoid burns from the steam and avoid any improper use. • When in use, do not touch any of the appliance’s hot surfaces. • After unpacking, make sure that the appliance is complete and undamaged. In case of doubt, do not use the appliance and seek the advice of a qualified service professional. • Packaging materials (plastic bags, foam polystyrene, etc.
Electrical requirements Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below.
Steam iron 316IDL/02.
