User manual
< 9 min
> 3 sec
EN
FR
20
Energy Saving Concept
Programming the water volume
Automatic OFF mode: the machine will
turn into OFF mode automatically after 9
minutes of non use.
To change automatic OFF mode from 9 to 30 minutes:
- Ensure the machine is turned OFF
- Press and hold both the Lungo and Ristretto buttons for more than 3 sec.
- Espresso button flashes 3 times for confirmation.
To revert back to 9 minutes, repeat the same procedure.
Espresso button flashes once for confirmation.
Any coffee button can be programmed.
1. Ristretto button: from 15 to 30 ml / 0.5-1 oz.
2. Espresso button: from 30 to 70 ml /1 to 2.33 oz.
3. Lungo button: from 70 to 130 ml / 2.33 to 3 oz.
- Ensure the machine is ON
- Open the slider and insert the capsule.
- Close the slider.
- Press and hold the selected coffee button.
- Release the button when desired volume is reached.
- The other 2 buttons flash for confirmation.
- Water volume is now stored for the button used during programming.
Energy Saving Concept /
Programming the Water Volume /
Automatic OFF mode: the machine will
turn into OFF mode automatically after 9
minutes of non use.
To change automatic OFF mode from 9 to 30 minutes:
- Ensure the machine is turned OFF
- Press and hold both the Lungo and Ristretto buttons for more than 3 sec.
- Espresso button flashes 3 times for confirmation.
To revert back to 9 minutes, repeat the same procedure.
Espresso button flashes once for confirmation.
Any coffee button can be programmed.
1. Ristretto button: from 15 to 30 ml / 0.5-1 oz.
2. Espresso button: from 30 to 70 ml /1 to 2.33 oz.
3. Lungo button: from 70 to 130 ml / 2.33 to 3 oz.
- Ensure the machine is ON
- Open the slider and insert the capsule.
- Close the slider.
- Press and hold the selected coffee button.
- Release the button when desired volume is reached.
- The other 2 buttons flash for confirmation.
- Water volume is now stored for the button used during programming.
Job: NES-432001-2003Q-3 ProdigioMilk
Datum: 15-06-05
von: timea.trojko
Uhrzeit: 15:03:43
Seite: q18
Version: --
qInletObjekt: