User Instructions

22
The coee is weak or not creamy
enough.
The coee is ground too coarsely. Turn the grinding adjustment dial one click
anticlockwise towards “1” while the coee mill
is in operation (g. 13). Continue one click at
a time until coee delivery is satisfactory. The
eect is only visible after delivering 2 coees
(see the section: “Adjusting the coee mill” on
page 12).
The coee is unsuitable. Use pre-ground coee for espresso machines.
The coee is delivered too slowly or a
drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial one click
clockwise towards “7” while the coee mill is in
operation (g. 13). Continue one click at a time
until coee delivery is satisfactory.
The eect is only visible after delivering 2
coees (see the section: “Adjusting the coee
mill” on
page 12 ).
Coee does not come out of one of the
spouts.
The spouts are blocked. Clean the spouts with a toothpick (g. 31).
The appliance does not come on. The connector is not inserted correctly. Insert the connector as far as it will go in the
socket at the back of the appliance (g. 1).
It is not plugged into the mains socket. Plug into the mains socket.
The main switch (A20) is not turned on. Press the main switch (g. 2).
The infuser cannot be extracted. The appliance has not been turned o
correctly.
Turn the appliance o by pressing the but-
ton (page 10).
The milk does not come out of the
milk spout.
The milk container lid is dirty. Clean the milk container lid as described in the
section “Cleaning the milk container”
(page
17)
.
The milk contains large bubbles and
squirts out of the milk spout or there
is little froth.
The milk is not cold enough or is not
semi-skimmed.
Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C).
If the result is not as you wished, try changing
brand of milk.
The froth adjustment dial is incorrectly
adjusted.
Adjust following the instructions in the section
“Making cappuccinos and milk based coees”
(page 13) .
The milk container lid or froth
adjustment dial are dirty.
Clean the milk container lid and dial as descri-
bed in the section “Cleaning the milk contai-
ner”
(page 17) .
The hot water/steam connection noz-
zle is dirty
Clean the connection nozzle as described in the
section “Cleaning the hot water/steam nozzle”
(page 17) .