User Instructions

12
To change the taste, press the
button (g. 10) repeat-
edly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the
button (g. 11) until the message corresponding to the required
quantity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT
≃40
STANDARD
≃60
LONG
≃90
EXTRA LONG COFFEE
≃120
Customising the “my coee” quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”.
To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 12).
2. Press the
button (g. 11) until “MY COFFEE” is
displayed.
3. Keep the button (g. 16) pressed until the message
“1 MY COFFEE Program quantity” is displayed and coee
delivery begins. Release the button.
4. As soon as the coee in the cup reaches the required level,
press the
button (g. 16) again.
The quantity of coee in the cup set has now been programmed.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (g. 13).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle, selecting the “Rinsing” function in
the settings menu (page10).
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the coee temperature in the settings menu
(page 11).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 14).
2. Place under the coee spouts:
- 1 cup, if you want to make 1 coee (g. 12);
- 2 cups if you want 2 coees (g. 15).
3. Lower the spout as near as possible to the cups (g. 15).
This makes a creamier coee.
4. Press the button corresponding to the number of coees
required (1 cup or 2 cups ).
5. Preparation begins. The amount of coee selected is dis-
played together with a progress bar which gradually lls as
preparation progresses.
Please note:
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing any button.
• At the end of delivery, to increase the quantity of coee in
the cup, just press (within 3 seconds) one of the coee but-
tons ( or ) (g. 16).
Once the coee has been made, the appliance is ready to make
the next drink.
Please note!